VME protocol

The master puts address onto the bus, delays a minimum of 35ns, and then asserts address strobe.  All slave cards on the bus monitor the addresses. Each slave is set up to decode a unique address.  For a write operation, the master asserts one or both of its data strobes.  The assertion of data strobe tells the slave that data is valid on the bus and can be strobed into memory. The slave then asserts data acknowledge to signal that the data has been captured.


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s